Setup Guide

Specification Prerequisite
• The DHCP server is fully functional with
appropriate PXE settings to PXE boot images
from ASM or Razor in your deployment
network.
Firmware and BIOS Requirements Make sure all the resources are configured with the
firmware versions listed in the section Supported
Resources
PowerEdge M1000e Chassis, blade server, and IO
aggregators
• Chassis Management Controller (CMC) for
M1000e chassis is configured and has the
management IP address and login credentials
assigned.
• Server iDRAC and IOA is configured and has the
management IP address and login credentials
assigned using CMC management interface.
Dell PowerEdge Hypervisor Servers Server iDRAC is configured and has the out-of-
band IP address and login credentials.
Dell PowerEdge Servers Dell PowerEdge Servers are configured and have
the management IP address and login credentials
assigned.
NOTE: The username (root) and password
required.
Dell PowerConnect 7024 switches
• The management IP address is configured for
the switches.
• ASM creates the virtual machine (VM) traffic
VLANs dynamically.
• Users have access to the switches with enable
passwords.
• Switches have SSH connectivity enabled.
Dell Force10 S4810 switches (Top-of-Rack [ToR])
• The management IP address is configured for
the ToR switches.
• ASM creates the virtual machine (VM) traffic
VLANs dynamically.
Dell 8 | 4 I/O modules
• The management IP address is configured for
the Brocade switches.
EqualLogic Storage Array
• The management and group IP addresses are
configured for Storage Array.
• All storage array members are added to the
group.
Compellent Storage Array .
• The management IP address is configured for
Storage Array
9