Release Notes

Known Issues
The following section lists the known issues with the Active System Manager (ASM) 7.5.2:
Issue [ASM-1184]: Unable to launch management interface for blade switches through ASM GUI.
Description: After discovering a Dell PowerEdge M1000e chassis, in the Resources page, click the
chassis, click View Details, and then click I/O Module Details tab in the Chassis Details page. This tab
shows a list of I/O Modules that contains links for the Management IP, which is not correctly launching
the management interfaces for these resources.
Resolution/Workaround: None
Issue [ASM-1152]: Unable to deploy a service using a template that contains more than one vCenter
cluster.
Description: If a template contains two clusters in the same vCenter instance, the service cannot be
deployed.
Resolution/Workaround: While deploying a service using a template, make sure the template contains
only a single vCenter Cluster.
Issue [ASM-1151]: CentOS is deployed successfully but ASM GUI displays a message that the
deployment is unsuccessful.
Description: Duplicate host names can cause this issue because the remote host operating system
checks the deployment with its host name. If an earlier host with a different service tag has checked in
with the same host name, the host name is not registered because the name already exists. If you
delete an earlier deployment, always use a unique host name.
Resolution/Workaround: Always use a unique host name.
Issue [ASM-1147]: If you delete a network that is used in a published template, the template remains
in the published state. However, the service cannot be deployed using the template.
Description: ASM will allow you to delete a network even if it is used in a template. If you attempt to
deploy a template with a deleted network, the service cannot be deployed.
Resolution/Workaround: Make sure that all the networks in the published template exist in ASM.
Issue [ASM-1134]: You cannot deploy the service if an ESXi host has iSCSI storage volumes attached
additionally, which is beyond the limit that ASM can deploy.
Resolution/Workaround: Before you deploy a host, make sure the host does not have storage that has
been provisioned already or you can review the access credentials on your storage array.
Issue [ASM-1122]: vSwitch created on servers with 1 GB NICs do not tag ports correctly.
Description: 1 GB NICs is not supported.
Resolution/Workaround: None