Users Guide

Figure 35. Device MAC Association — SNMP Credentials

1. In the Read Community String field, enter the read community string (for example, public).

2. In the Write Community String field, enter the write community string (for example, private).

The trap port and SNMP port numbers display as read-only fields.

3. From the Protocol drop-down menu, select one of the following protocols:

• Telnet

• SSHv2

NOTE: AFM automatically enters the default credentials for the username, password, and

enable password. To unmask the passwords, check the Show Password as Text checkbox.

4. Click Next.

The DHCP Integration screen displays.

DHCP Integration

NOTE: If you are using a local DHCP server, you do not need to make any changes on this screen. If

you are using a remote DHCP server, download the DHCP config file from the AFM server, upload it

to the remote DHCP server, and restart the remote server. For more information, refer to DHCP

Integration and DHCP Settings in Administrative Settings .

Configuring and Deploying the Fabric