Users Guide

7
Configuring and Deploying the Fabric
After creating a fabric on the Network > Design Fabric > New Fabric screen, configure and deploy the
fabric on the Network > Fabric Name > Configure and Deploy screen. This screen deploys the
configuration to the switches in the fabric, as well as auto-generated and custom configurations. This
screen contains the following options:
• Deploy Fabric — Prepares the fabric for deployment and deploys the fabric.
– Pre-deployment Configuration
For information about using the pre-deployment wizard for an IOA fabric, see IOA Pre-
deployment Wizard
– Deploying and Validate
– View DHCP Configuration
• Errors — Displays errors in the fabric.
Related Links:
– Deployment and Validation Errors
– Troubleshooting
• CLI Configuration — Uses CLI commands for template and custom configuration.
– Manage Templates
– Associate Templates
– Custom Configuration
– Viewing Custom Configuration History
• View Wiring Plan — Displays the wiring plan in tabular, network topology, and graphical formats,
which can be exported.
Related Links:
• Pre-deployment Configuration
• Using the Pre-deployment Configuration Wizard. For information about using the pre-deployment
wizard for an IOA fabric, refer to IOA Pre-deployment Wizard.
Pre-deployment Configuration
In the Step 2: Pre-deployment Configuration section of the Getting Started screen:
Configuring and Deploying the Fabric
87