Users Guide

The name must be unique. The range is 1–16 characters. AFM supports the following character

types:

• alphanumeric

• underscore ( _ )

• +

10. To allocate ports, enter a value in the appropriate field in the Config Speed section.

• Fabric Link

• VLTi Link

• Stack Ports

NOTE: Configure at least two fabric links.

The Remaining Ports field displays the number of available ports. The Total column displays the

amount of bandwidth in Gb allocated to each link type.

The Downlinks Ports field displays the number of ports configured as downlinks during pre-

deployment. The default is 0.

11. To save the current switch information, click OK.

To close the window without saving information, click Cancel.

12. To go to the Advanced Port Config screen, click Next.

Editing Access Switch Information

1. Select a configured switch.

2. In the upper left of the Advanced Access Config screen, click Edit.

The Edit Switch Unit window displays.

NOTE: Depending on pre-deployment/deployment status, some options cannot be changed.

Refer to Operations Allowed.

3. To save changes, click OK.

Removing Access Switches

1. Select a configured switch.

2. In the upper left of the Advanced Access Config screen, click Delete.

3. To confirm the switch deletion, click Yes.

Advanced Fabric Design — Port Configuration

To configure the proposed port numbers for uplinks, stack ports, VLTi links, and fabric links, use the

Advanced Port Config screen. To export the data, click Export.

NOTE: Configure only one source port number per switch.

Designing the Fabric