Users Guide

• VLT

NOTE: Z9000 and S6000 do not support stack mode.

4. (VLT mode only) Enter a value in the Number of VLT pairs field.

NOTE: Both switches in the VLT pair must be the same model type.

5. (MXL, S55, or S60) Select an optional module type from the first and second Optional Module drop-

down menus:

NOTE: The first optional module menu name and options vary based on the access switch type

and mode (standalone or stack). Refer to the following table for supported options.

Table 20. Access Config Optional Module Options

Switch type & mode Optional Module Supported Options

S55 (standalone) 0/48 2 x 10G — Fiber

0/50 2 x 10G — Fiber

S55 (stack) 0/48 2 x 10G — Fiber

0/50 2 x 12G — Fiber

S60 (standalone) 0/48 2 x 10G — Fiber

S60 (stack) 0/48 2 x 10G — Fiber

0/50 2 x 12G — Fiber

1 x 24G — Fiber

MXL 0/41 2 x 40G — Fiber

4 x 10G — Fiber

4 x 10G — Copper

0/48 2 x 40G — Fiber

4 x 10G — Fiber

4 x 10G — Copper

None

NOTE: Select this option if you

don’t have any optional

modules in this slot.

6. (Stack mode only) Enter a value in the Number of Stacking Switches field.

NOTE: All switches in the stack must be the same model type.

7. (Stack mode only) Select a value from the Number of Switches per Stack drop-down menu.

• 1

• 2

8. (Standalone mode only) Enter a value in the Number of Switches field.

9. (Optional) Enter a custom prefix switch name. The default switch name is FabricName-Access.

NOTE: Only the name of the first switch in a stack can be changed. The other switch is

appended (standby).

Designing the Fabric