Users Guide

about the Advanced Options, refer to Configuring Advanced Options. For information about tiers, refer

to Deployment Topology and Deployment Topology Use Cases.

1. Navigate to the Network > Design Fabric > New Fabric > Deployment Topology > Fabric

Customization screen.

2. From the Fabric Link Bandwidth drop-down menu, select the fabric link maximum bandwidth for

each access switch.

3. Click Next to go the Output screen.

Advanced Fabric Design

Use the following screens to design a custom topology for a two-tier Layer 2 fabric. The access (leaf)

switches can be in VLT, stack, or standalone mode and the aggregation (core) switches use VLT.

• Advanced Fabric Design — Aggregation Configuration

• Advanced Fabric Design — Access Configuration

• Advanced Fabric Design — Port Configuration

Designing the Fabric