Users Guide

SMTP Email
To configure SMTP email:
1. Navigate to the Administration > Settings screen.
2. In the Secure SMTP Email Settings area, click Edit.
3. In the Outgoing Mail Server field, enter the IP address or complete host name of the email server.
4. In the Server Port field, enter the port number of the email server.
5. In the User Name field, enter the user name.
6. In the To Email Address(es) field, enter the mail addresses separated by a semicolon (;).
7. From the Minimum severity level to Email Notification drop-down menu, select one of the
following settings:
• Critical
• Major
• Minor
• Warning
8. Click OK .
SNMP Configuration
Configure SNMP so that AFM can perform SNMP queries on the switches in the fabric. AFM uses the
SNMP configuration values for configuring and monitoring the switches.
1. Navigate to the Administration > Settings screen.
2. In the SNMP Configuration area, click Edit.
3. In the Read Community String field, enter the read community string (for example, public).
4. In the Write Community String field, enter the write community string (for example, private).
5. In the Port field, enter the SNMP port number of the switches. The port number is typically 161.
6. In the Trap Host field, specify the IP address for AFM so that the traps are sent to AFM.
7. Click OK.
Syslog Server IP Addresses
To configure the syslog server for event logging:
1. Navigate to the Administration > Settings screen.
2. In the System IP Addresses area, configure up to eight syslog server IP addresses for logging events
on the switches in the fabric. By default, the first syslog IP address entry is the AFM system IP
address.
System Information
1. Navigate to the Administration > Settings screen.
2. From the System IP Address drop-down menu, select the AFM management IP address.
NOTE: If you configured multiple Network Interface Card (NIC) adapter cards on AFM, select
the AFM management IP address.
Administration
211