Users Guide

2. In the Client Settings area, click Edit.
3. From the GUI Polling Interval (in Seconds) drop-down menu, select one of the following options.
The default value is 60 seconds.
• 15 Seconds
• 30 Seconds
• 60 Seconds
• 120 Seconds
4. From the Pop-out Client Session drop-down menu, select the maximum number of browser
windows for each user’s session. The range is 3–7 and the default value is 3.
5. Click OK.
Data Retention Settings
To configure the amount of time to retain performance history:
1. Navigate to the Administration > Settings screen.
2. In the Data Retention area, click Edit.
3. In the Performance History area, enter the number of days to retain the performance history. The
range is 1–180.
4. From the Daily Purge Execution Time drop-down menu, specify when to purge the performance
history data.
5. Click OK.
DHCP Server Settings
To select a local or remote DHCP server:
1. Navigate to the Administration > Settings screen.
2. Navigate to the DHCP Server Settings area and select one of the following settings:
• Local — Provision AFM as a DHCP server. If you select this option, AFM automatically integrates
the generated dhcp.config file into the DHCP server on AFM during pre-deployment
• Remote — Use an external DHCP server. If you select this option, manually install the
dhcp.config file generated during pre-deployment on the DHCP server before deploying the
fabric.
3. Click OK .
NTP Server Settings
To configure NTP server settings:
1. Navigate to the Administration > Settings screen.
2. In the NTP Server Settings area, click Edit.
3. Enter the NTP server primary IP address.
NOTE: The IP Status and Secondary IP Status fields display the current status of the servers.
4. Enter the NTP server secondary IP address.
5. Click OK .
210
Administration