Users Guide

Figure 89. TCA Bandwidth
• Average Traffic Threshold — Configure the threshold for a Layer 3 fabric. The range is 60–
90 percent. The monitoring value applies only to the fabric link between the spine and leaf switches.
• Low Utilization — Configure the value for TCA. The range is 40–60 percent. If AFM exceeds this
value, the graphical performance monitoring displays a solid red line labeled Traffic Utilization Alert
Threshold. AFM clears the alarm and removes the red line when traffic is within the specified values.
• High Utilization — sets the highest value for TCA. The range is 60–80 percent. If AFM exceeds this
value, the graphical performance monitoring displays a solid red line labeled Traffic Utilization Alert
Threshold. AFM clears the alarm and removes the red line when traffic is within the specified values.
• Job ID — AFM creates a job ID when you create the schedule.
Using real-time performance management at the port level, AFM displays a solid red line appears on the
threshold label Traffic Utilization Alert Threshold when traffic exceeds the TCA.
Figure 90. Traffic Utilization Alert Threshold
For information about how to view port performance, refer to Port Performance. Select the Real-Time
Data option.
182
Performance Management