Users Guide

Switch Deployment Status Description Requires
Action
Recommended Actions
then clicking Deploy
Selected.
NOTE: Verify that the
switch is in BMP mode.
MIN CONFIG UPLOAD
INPROGRESS
Minimum Configuration
Upload In-Progress
No Information only
MIN CONFIG UPLOAD
ERROR
Minimum Configuration
Upload Error
Yes
1. Verify the connectivity to the
TFTP/FTP server from the
switch.
2. Resolve any errors the
Validation Status column.
3. Verify that the system MAC
address in the dhcpd.conf file
matches the csv. file with the
MAC addresses of the
switches.
4. Verify that the min.cfg file is
in the correct directory on
the TFTP/FTP server.
5. Redeploy the switch from the
Network > Fabric Name >
Configure and Deploy screen
by selecting the switch from
the list and clicking Deploy
Selected.
NOTE: Verify that the
switch is in BMP mode.
MIN CONFIG UPLOAD
COMPLETED
Minimum Configuration
Upload Successful
No Information only
INIT SOFT RELOAD Initiated Soft Re-load
on Switch
No Information only
INIT SOFT RELOAD ERROR Error During Soft Re-
load on Switch
Yes
1. Check the switch syslogs for
a reload command failure.
2. Resolve any errors.
3. Restart switch deployment
from the Network > Fabric
Name > Configure and
Deploy screen by selecting
the switch from the list and
clicking Deploy Selected.
NOTE: Verify that the switch
is in BMP mode.
PROTOCOL CONFIG
UPLOAD INPROGRESS
Protocol Configuration
Upload In-Progress
No Information only
PROTOCOL CONFIG
UPLOAD ERROR
Protocol Configuration
Upload Error
Yes
1. Verify the connectivity to the
TFTP server from switch.
Troubleshooting
169