Users Guide

Figure 80. Fabric Summary Screen — Graphical View
For information about how to configure the Active Link, navigate to the Administrative > Settings >
Active Link Settings screen.
• Show Tooltips — View information about a switch such as associated fabric, switch name, model
name, IP address, alarm status, and managed state when you place the cursor over the switch.
• Show All Links — View all the links between the spines and the leaves, aggregation and access, or
aggregation, access, and core.
• Enter switch name — To locate a switch in the fabric, enter the switch name and click the search
icon. The switch name is case-sensitive.
Switch Summary
To view the following switch summary information from a graphical view, navigate to the Network >
Fabric Name > Switch Name screen and then click the Summary tab. Make sure that the Graphical
button is selected in the upper right of the screen. You can also view this information in a tabular view by
selecting the Tabular button.
• Click on a port to display information about the state of the port
• Click on the Port Legends arrow to display the port legends.
• Click on the Launch Active Link from the graphical or tabular view to display additional statistics
about a switch through the AFM using a OMNM server. For information about how to configure a
element management service, navigate to the Administrative > Settings > Active Link Settings screen.
• Status
• Active Alerts
• Speed
• Manage State
Viewing the Fabric
159