Users Guide

Figure 74. Discover Fabric SNMP Credential Screen
10. Enter the SNMP credential information and click OK to confirm the information or click Close to
close the window. By default, the SNMP port number is 161 and the trap port number is 162. The
maximum number of SNMP credentials is five.
• Enter the read community string in the Read Community String(s) field. You can only enter one
read community string.
NOTE: The SNMP credential information requires the read community string.
NOTE:
• To delete SNMP credentials, check the checkbox for the credentials you want to delete and
click Delete in the SNMP section. There is no confirmation message before the credentials
are deleted.
• To edit SNMP credentials, check the checkbox for the credentials you want to edit and click
Edit in the SNMP section. Click OK to save changes or click Close to close the window.
11. Click Add in the CLI Credentials section.
The CLI Credential window displays.
Figure 75. Discover Fabric CLI Credential Screen
NOTE: Configure up to five CLI credentials for a single fabric. AFM supports combinations of
credential types (SSHv2 and Telnet).
Discovering and Deploying an Existing Fabric
149