Users Guide

3. Click Copy Template.
The Copy Template screen displays.
4. Select the template to copy.
5. In the Template Name field, enter a unique name for the new template. \
6. Click OK.
Associating Templates
Associate one or more existing configuration templates to the entire fabric, all spines, all leaves, all
aggregation devices, all access devices, all core switches, or a set of switches. If you associate a template
with an entire fabric, all spines, all leaves, all aggregation devices, all access devices, or core switches, the
template is automatically applied to the newly added switches so you don’t have to create new
associations manually. You can also edit and delete templates.
NOTE: Each template can have only one association per fabric. AFM does not support template
ordering for command sequencing. If you want sequence commands, Dell Networking
recommends manually combining the templates into a single template.
Associating Templates
1. Navigate to the Network > Fabric > Configure and Deploy screen.
2. From the CLI Configuration drop-down menu, select the Associate Templates option.
3. Click Add Association.
4. In the Template Name drop-down menu, select the template.
5. (Optional) In the Comments field, enter any comments about this association.
6. In the Select Association area, select one the following options:
• All — Associate the template with all switches in the fabric
• Aggregation — Associate the template with all aggregation switches
• Access — Associate the template with all access switches
• Core — Associates the template with all core switches
• Custom — Associate the template with specific switches. Specify the switches in the Available
Switches area.
• Leafs — Associate the template with all leaf switches
• Spines — Associate the template with all spine switches
7. Click Apply.
Editing Template Associations
1. Navigate to the Network > Fabric > Configure and Deploy screen.
2. From the CLI Configuration drop-down menu, select Associate Templates.
3. Select the template.
4. Click Edit Association.
5. Edit the association.
6. Click OK.
Deleting Template Associations
1. Navigate to the Network > Fabric > Configure and Deploy screen.
Configuring and Deploying the Fabric
143