Users Guide

Table 31. Deployment Status
Number Status Status Details Recommended Action
1 Required Deployment Required None
2 Complete Deployment successfully completed None
3 Error Protocol transfer failed Verify TFTP/FTP connectivity and FTP
credentials
5 Error Device cleanup task failed
1. Verify the switch connectivity from
AFM using Telnet or SSH.
2. Re-deploy the switch from the
Network > Fabric Name >
Configure and Deploy screen by
selecting the switch from the list
and then clicking Deploy Selected.
6 Error Complete config upload failed
1. Verify TFTP/FTP or Telnet/SSH
connectivity and verify credentials.
2. Re-deploy the switch from the
Network > Fabric Name >
Configure and Deploy screen by
selecting the switch from the list
and then clicking Deploy Selected.
7 Error Smart script transfer failed None
8 Error Custom config upload failed Verify the login and configuration
commands on the switch
9 Error Backup config failed
1. Verify Telnet or SSH connectivity
from AFM.
2. Re-deploy the switch from the
Network > Fabric Name >
Configure and Deploy screen by
selecting the switch from the list
and then clicking Deploy Selected.
10 InProgress Verifying that the switch is eligible for
the deploy process
None
11 InProgress Protocol transfer in progress... None
12 InProgress Device cleanup task done, reload in
progress...
None
13 InProgress Complete config upload in progress... None
14 InProgress Smart script transfer in progress... None
15 InProgress Custom config upload in progress... None
16 InProgress Backup config in progress... None
17 InProgress Merged config upload in progress... None
1. Verify that the software images for the switches are installed on the TFTP or FTP server.
2. Verify that you have configured the correct TFTP or FTP address on the Administration > Settings
screen. If you change the TFTP server now, the address is not correct unless you reconfigure the
pre-deployment.
Configuring and Deploying the Fabric
135