Users Guide

Field Name Description
NOTE: VLANs previously associated with storage-facing ports are
included in the selection list.
Table 29. Layer 2 VLAN Mapping Options
Option Description
Auto-fill Tagged Port For selected VLANs, apply sequential tagging to the available ports and the
number of ports specified on a VLAN.
Auto-fill Untagged Port For selected VLANs, apply untagged ports. Based on available ports,
associate only one port per VLAN.
NOTE: The number of Port/VLAN Ports option is disabled on the
Autofill Tagged/Untagged Port screen.
Copy Switch VLAN
Config
Copy the VLAN association from the current switch to other switches in the
fabric.
Copy VLAN Port Config Copy the VLAN association from a selected port to other ports in a switch.
Port-VLAN Association Map the physical port to the VLAN ID. For example, map one port to
multiple VLANs.
VLAN-Port Association Map the VLAN ID to physical port interfaces. For example, map one VLAN to
multiple ports.
Copy VLAN Tagged Port
Config
Copy the VLAN tagged port configuration from a selected port to other
ports in a switch.
1. Navigate to the Network > Fabric Name > Configure and Deploy screen.
2. From the Deploy Fabric drop-down menu, select Pre-deployment Configuration.
3. Navigate to the VLAN Mapping screen.
Figure 67. Pre-deployment Configuration — VLAN Mapping
4. From the Switches drop-down menu, select an access or aggregation switch.
The selected switch for the VLAN mapping displays in the read-only Model field.
128
Configuring and Deploying the Fabric