Users Guide

Figure 54. Add Static Route Window
Configure up to 10 static routes for each aggregation device. When you check the Default Route
option, AFM automatically populates the destination network field as 0.0.0.0/0. For static routes,
enter the destination network and the next hop.
Figure 55. Uplink Configuration Screen
• L2 — Configures Layer 2 uplinks for a Layer 2 fabric. This option is disabled by default on a Layer 3
Distributed Core fabric.
• L3 — Configures uplinks for a Layer 2 VLT or Layer 3 Distributed Core fabric. If you select the L3
option, the Uplink Configuration screen displays additional options to configure the Layer 3
protocol settings.
Configuring and Deploying the Fabric
117