Users Guide

7. Click Next to go the VLAN Configuration screen.
L2 VLT Pre-deployment - VLAN Configuration
Specify at least one VLAN for the Layer 2 fabric manually or automatically using this screen.
1. Navigate to the Network > Fabric Name > Configure and Deploy screen.
2. From the Deploy Fabric drop-down menu, select the Pre-deployment Configuration option.
3. Navigate to the VLAN Configuration screen.
Figure 49. VLAN Configuration without VLAN and VRRP Configuration
4. Check the VLAN and VRRP Configuration option to configure the VLAN ID, primary IP address,
secondary IP address, and virtual address.
5. Click the Add VLAN link.
The Add VLAN Window displays.
NOTE: If you add a VLAN and do not enable the VLAN and VRRP Configuration option, you
can only enter the VLAN ID and IP address range.
6. In the VLAN ID field, enter the VLAN ID. The range is 2–4094. There is no default value.
7. In the Primary IP address field, enter the primary IP address. AFM automatically enters the default
prefix (24), but there is no default IP address. The range is 8–29.
8. In the Secondary IP address field, enter the secondary IP address. AFM automatically enters the
default prefix (24), but there is no default secondary IP address. The range is 8–29.
9. In the Virtual IP address field, enter the virtual IP address. AFM automatically enters the default prefix
(24), but there is no default virtual IP address. The range is 8–29.
10. Click Next to view the Port Channel Configuration screen.
110
Configuring and Deploying the Fabric