Users Guide

Figure 43. IOA SNMP and CLI Credentials Screen
4. In the Read Community String field, enter the read community string (for example, public).
5. In the Write Community String field, enter the write community string (for example, private).
6. From the Protocol drop-down menu, select one of the following protocols:
• Telnet
• SSHv2
NOTE: AFM automatically enters the default IOA credentials (username root, password
calvin).
7. In the User Name field, enter the user name.
8. In the Password field, enter the password.
9. In the Confirm Password field, confirm the password.
10. In the Enable Password field, enter the enable password.
11. In the Confirm Enable Password field, confirm the enable password
12. Click Next to go to the Summary screen.
Pre-deployment (IOA) — Software Images
To specify the software images for each type of switch in the fabric, use the Software Images screen. The
software image must be the same for each type of platform. Place the software image for the switches
on the TFTP or FTP site so that the switches can install the appropriate Dell Networking operating system
software image and configuration file from this site. To change the address of the TFTP or FTP site,
navigate to the Administration > Settings > TFTP/FTP screen.
NOTE: To download the latest Dell Networking operating system software version for the switch,
refer to Upload Switch Software in the AFM Installation Guide.
Configuring and Deploying the Fabric
103