Users Guide

NOTE: By default, the AFM VM CPU is set to 2. To use the HA feature, change the virtual CPU to

AFM Client Browser Requirements

• Internet Explorer® 9 and higher

• Firefox® 12 and higher

OMNM Requirements

NOTE: The following is required to use the OMNM feature on the AFM:

• OMNM Server Release 5.3 and higher

NOTE: The OMMN server is not installed on the same server as AFM. To activate the performance

statistics, login directly as write permission into Dell OMNM web service.

For information about how to install and configure OMNM, use the following URL:

http://www.dell.com/support/Manuals/us/en/555/Product/dell-openmanage-network-manager.

NOTE: By default, the web service is disabled in the OMNM server.

1. Navigate to the server installation directory on the OMNN server.

2. Navigate to the installed.properties file at C:\ProgramFiles\Dell\OpenManage\Network

Manager\owareapps\installprops\lib.

3. Disable the application server and the synergy network management server.

4. Add the following three lines in the installed.properties file:

com.dorado.core.ws.disable=false

com.dorado.core.ws.legacy.soap.enabled=true

oware.webservices.authrequired=false

5. Enable Resource Monitoring.

6. Start the application server and synergy network management server.

Port Usage

The following table lists the default ports that the various AFM services use. To troubleshoot connectivity

issues with the AFM server, use the following table:

Table 2. Ports

Port Description

20 & 21 FTP

22 SSH and SCP (communication to switches and CLI access to the AFM server)

23 Telnet (communication to switches)

67 & 68 DHCP

69 TFTP

80 AFM server port listening for client connection and requests

Configure Active Fabric Manager as a Virtual Appliance