Users Guide

5
AFM Server Initial Configuration
After you deploy and start the AFM VM, you can perform the initial AFM server configuration tasks.
To access the AFM virtual machine:
1. From the AFM VM, click the Console button.
2. Login as superuser.
If there is an IP assigned to the VM the first time you log in from the console or SSH using
superuser, AFM prompts you to change the password for superuser.
Use this password for both the web URL login and console login.
If no IP is assigned to the VM because you did not enable DHCP, AFM prompts you to configure the
network and reboots the VM.
Figure 1. AFM Virtual Machine Menu
Configuring the System
To configure the AFM server settings, use the Configure System option.
• Device configuration (Network Configuration) — Use this option to configure a static IP as the AFM
Ethernet controller or change another device’s eth0 attribute.
12
AFM Server Initial Configuration