Users Guide

6. Click Next.
The IOA Fabric Design wizard appears.
7. Click Next.
The Chassis Details screen appears.
Figure 38. IOA Fabric Design Wizard — Chassis Details Screen
8. Enter the Chassis Management Controller (CMC) IP addresses to include in the fabric.
• Add — Enter the chassis IP address in the first field and the prefix in the field after the slash and
click OK. To close the window without adding the IP address, click Cancel.
• Edit — Edit information for a specific chassis by selecting the checkbox for that chassis then
clicking Edit. After changing the IP address, click OK. To close without saving changes, click
Close.
NOTE: You cannot edit information for multiple chassis simultaneously.
• Delete: — Check the check box for the chassis that you want to delete, then click Delete. To
confirm the deletion, click Yes. To cancel the deletion, click No.
• Add Range — Enter the chassis ID in the Number of M1000e Chassis field. Enter the first IP
address in the range in the Start IP Address/Prefix field. Enter the prefix in the field after the slash.
To add the range, click OK. To close without adding the IP range, click Cancel.
9. Click Next.
The CLI Credentials screen appears.
92
IOA Fabric Designer Wizard