Users Guide

Table 34. Access Config Optional Module Options

Switch Type and Mode Optional Module Supported Options

S55 0/50 2 x 10 G — Fiber

0/48 2 x 12 G — Fiber (Stack mode only)

2 x 10 G — Fiber

S60 0/48 2 x 10 G — Fiber

0/50 (Stack mode only) 2 x 12 G — Fiber

1 x 24 G — Fiber

MXL (one-tier topology only) 0/41

0/49

2 x 40 G — Fiber

4 x 10 G — Fiber

4 x 10 G — Copper

N3000 series 1/1/1 2 x 10 G — Fiber

2 x 10 G — Copper

N4000 series 1/1/1 4 x 10 G — Fiber

4 x 10 G — Copper

2 x 40 G — Fiber

None

NOTE: Select this option if you

do not have any optional

modules in this slot.

8. (Stack mode only) Enter a value in the Number of Stacks field.

NOTE: All switches in the stack must be the same model type.

The Number of Switches Per Stack menu is automatically set to 2.

9. (Standalone mode only) Enter a value in the Number of Switches field.

10. The default switch name is FabricName-Access. To specify a custom name, enter one in the Prefix

Switch Name field.

NOTE: Only the name of the first switch in a stack can be changed. The other switch is

appended (standby).

The name must be unique. The range is 1–18 characters. AFM supports the following character

types:

• alphanumeric

• underscore ( _ )

• -

11. To use 40 GB split port from the aggregation layer, select Use 40 Gb => 10 Gb for Fabric Link in

Aggregation.

Designing a Fabric