Users Guide

Editing Aggregation Switch Information
1. Select a configured switch.
2. In the upper left of the Advanced Aggregation Config screen, click Edit.
The Edit Switch Unit dialog box appears.
NOTE: Depending on pre-deployment/deployment status, some options cannot be changed.
Refer to Operations Allowed.
3. To save changes, click OK.
Removing Aggregation Switches
1. Select a configured switch.
2. In the upper left of the Advanced Aggregation Config screen, click Delete.
3. To confirm the switch deletion, click Yes.
Advanced Fabric Design — Advanced Access Config
On the Advanced Access Config screen of the Fabric Design wizard, you can add:
• Add access switches
• Editing access switch information
• Remove access switches
The selected aggregation switch model and the available, used, and total bandwidth values appear at the
top of the screen.
Adding Access Switches
Figure 29. Advanced Access Config Screen
1. (Three-tier topologies only). From the Aggregation Switch menu, select the aggregation switches for
which you want to configure access switches.
2. In the upper left of the Advanced Access Config screen, click Add.
The Add Switch Unit dialog box appears.
Designing a Fabric
77