Users Guide

Table 30. Support for 40 GB to 10 GB Split

Core Switch Aggregation Switch

Z9500 S6000 S4820 S4810 S4048–ON S3048–ON

Z9500 S S S

S6000 S S S

S4820 S

S4810 S S S

S4048–ON S S S

N4000 S

”S” denotes support for 40 GB to 10 GB split.

Table 31. Support for 40 GB to 10 GB Split (Continued)

Core Switch

S60 S55 MXL N4000 N3000 N2000

Z9500 S S S S S S

S6000 S S S S S S

S4820 S S S S S

S4810 S S S S S S

S4048–ON S S S S S S

N4000 S S S S S S

”S” denotes support for 40 GB to 10 GB split.

15. To allocate ports, enter or select a value in the appropriate field in the Port Specification (per switch)

or Port Specification (per stack) section.

• Fabric Link

• Stack Ports (Stack mode only)

NOTE: Configure at least two fabric links.

• Inter Chassis Link (VLTi or MLAG)

• Split Ports (If switch model configuration allows)

The Split Ports field enables available 40G ports to act as 10G ports for any device type. You can

select the number of 10G ports split from a 40G port from the drop-down menu. The Remaining

Ports field displays the number of available ports; you cannot edit this field. The Total column

displays the amount of bandwidth in GB allocated to each link type.

16. To save the current switch information, click OK.

To close the window without saving information, click Cancel.

17. To go to the Advanced Access Config screen, click Next.

Designing a Fabric