Users Guide

Table 29. Aggregation Config Optional Module Options

Switch Type and Mode Optional Module Supported Options

S55 (standalone) 0/48 2 x 10 G — Fiber

0/50 2 x 10 G — Fiber

S55 (stack) 0/48 2 x 10 G — Fiber

0/50 2 x 12 G — Fiber

S60 (standalone) 0/48 2 x 10 G — Fiber

S60 (stack) 0/48 2 x 10 G — Fiber

0/50 2 x 12 G — Fiber

1 x 24 G — Fiber

MXL 0/41 2 x 40 G — Fiber

4 x 10 G — Fiber

4 x 10 G — Copper

0/48 2 x 40 G — Fiber

4 x 10 G — Fiber

4 x 10 G — Copper

None

NOTE: Select this option if you

do not have any optional

modules in this slot.

10. (VLT or MLAG mode only) Enter a value in the Number of VLT pairs or Number of MLAG pairs field.

NOTE: Both switches in the VLT or MLAG pair must be the same model type.

11. (Stack mode only) Enter a value in the Number of Stacks field.

NOTE: All switches in the stack must be the same model type.

The Number of Switches Per Stack menu is automatically set to 2.

12. (Standalone mode only) Enter a value in the Number of Switches field.

13. The default switch name is FabricName-Agg. To specify a custom name, enter one in the Prefix

Switch Name field.

NOTE: Only the name of the first switch in a stack can be changed. The other switch is

appended (standby).

The name must be unique. The range is 1–18 characters. AFM supports the following character

types:

• alphanumeric

• underscore ( _ )

• -

14. To use 40 GB split port from the core layer, select Use 40 Gb => 10 Gb for Fabric Link in Core.

Designing a Fabric