Users Guide

Figure 28. Add Switch Unit Dialog Box

NOTE: The information and options in the Add Switch Unit dialog box vary based on the

selected aggregation switch model.

2. Select Supports downlink if the switch connect servers or other switches which are not part of the

fabric. When a switch is configured this way, that part of the fabric cannot extend any further.

3. Select a switch model from the Switch Model drop-down menu.

• S6000

• S55 (only available if you select Supports downlink)

• S60 (only available if you select Supports downlink)

• S4820T

• S4810

• S4048–ON

• S3048–ON (only available if you select Supports downlink)

• N4064F

• N4064

Designing a Fabric