Users Guide

Aggregation

Switch

Deployment Type

VLT MLAG Stack Standalone

S4810 NE

S4820 NE

S6000 NE

Z9500 NE

”NE” denotes non-endpoint switches that can extend with another tier.

2. (N3000 and N4000 series switch models only) Select an optional module type from the Optional

Module drop-down menu. Options vary based on the switch type. Refer to the following table for

supported options.

Table 24. Aggregation Config Optional Module Options

Switch Type and Mode Optional Module Supported Options

N3000 series 1/1/1 2 x 10 G — Fiber

2 x 10 G — Copper

N4000 series 1/1/1 4 x 10 G — Fiber

4 x 10 G — Copper

2 x 40 G — Fiber

S55 (one-tier topology only) 0/50 2 x 10 G — Fiber

0/48 2 x 12 G — Fiber (Stack mode only)

2 x 10 G — Fiber

S60 (one-tier topology only) 0/48 2 x 10 G — Fiber

0/50 (Stack mode only) 2 x 12 G — Fiber

1 x 24 G — Fiber

MXL (one-tier topology only) 0/41

0/49

2 x 40 G — Fiber

4 x 10 G — Fiber

4 x 10 G — Copper

None

NOTE: Select this option if you

do not have any optional

modules in this slot.

3. (Z9500 switch model only) In the License Type field, select the number of ports licensed: 36

(default); 84; or 132.

Designing a Fabric