Users Guide

Figure 24. Standard Fabric Design — Fabric Customization

5. Click Next to go the Output screen.

Advanced Fabric Design

To design custom fabrics for Layer 2 fabric or mixed node topologies with one-, two-, or three-tiers,

refer to the following topics:

• Advanced Fabric Design — Advanced Core Config

• Advanced Fabric Design — Advanced Aggregation Config (One- or Two-Tier Topologies)

• Advanced Fabric Design — Advanced Aggregation Config (Three-Tier Topologies)

• Advanced Fabric Design — Advanced Access Config

• Advanced Fabric Design — Port Configuration

Advanced Fabric Design — Advanced Core Config

On the Advanced Core Config screen of the Fabric Design wizard, you can configure the switch settings

for the core.

This screen displays the default values for the fabric uplinks and inter chassis (VLT or MLAG) links. Uplinks

connect the fabric from the next upstream tier of devices to the aggregation layer of the network. The

minimum number of uplinks is two: one uplink is the active link and one uplink is for redundancy.

Designing a Fabric