Users Guide
5. In the User Name field, enter the user name.
6. In the To Email Address(es) field, enter the mail addresses separated by a semicolon (;).
7. In the To Email Address(es) field, enter the mail addresses separated by a semicolon (;).
• Critical
• Major
• Minor
• Warning
8. Click OK.
SNMP Configuration
Configure SNMP so that AFM can perform SNMP queries on the switches in the fabric. AFM uses the
SNMP configuration values for configuring and monitoring the switches.
1. From the menu, click Administration and then click the Settings tab.
2. In the SNMP Configuration area, click Edit.
3. In the Read Community String field, enter the read community string (for example, public).
4. In the Write Community String field, enter the write community string (for example, private).
5. In the Trap Port field, enter the SNMP port number of the switches. The port number is typically 161.
6. In the Trap Host field, specify the IP address for AFM so that the traps are sent to AFM.
7. Click OK.
Syslog Server IP Addresses
To configure the syslog server for event logging:
1. From the menu, click Administration and then click the Settings tab.
2. In the Syslog IP Address(es) area, click Edit.
3. In the System IP Addresses area, configure up to eight syslog server IP addresses for logging events
on the switches in the fabric. By default, the first syslog IP address entry is the AFM system IP address.
System Information
1. From the menu, click Administration and then click the Settings tab.
2. In the System Information area, click Edit.
3. From the System IP Address drop-down menu, select the AFM management IP address.
NOTE: If you configured multiple Network Interface Card (NIC) adapter cards on AFM, select
the AFM management IP address.
TFTP/FTP Settings
1. From the menu, click Administration and then click the Settings tab.
2. For FTOS switches, select either TFTP or FTP to configure settings for that type of server. For
PowerConnect switches, you can only configure TFTP server settings.
3. For PowerConnect switches, in the PowerConnect TFTP Configuration area, select one of the
following options:
• Local — Provision AFM as a TFTP server. The TFTP server uses the AFM management IP address.
224
Administration