Users Guide

• Use DHCP — Allow DHCP to assign an IP address to the VM.
• Static IP — Specify the static IP Address of the AFM server.
NOTE: To verify connectivity, ping the IP address assigned to the AFM. If the destination
host is unreachable, assign the same IP address.
• Netmask — Specify the subnet mask of the static IP address for the AFM Server.
• Default gateway IP — Specify the gateway IP Address of the AFM server.
• Primary DNS Server — Specify the primary DNS server address. To enable the DNS server on AFM
Server, use this option.
• Secondary DNS Server — Specify the secondary DNS server address.
5. Select OK to save your changes.
6. Select Quit to exit this screen.
Configuring DNS Settings
1. Select the Configure System option.
2. Select the DNS configuration option.
To navigate between elements, use the Tab and down arrow.
3. Modify the following settings as needed:
Figure 103. DNS Configuration Screen
• Hostname — Configure the host name for the AFM server.
• Primary DNS — Configure the primary DNS.
• Secondary DNS — (Optional) Configure the secondary DNS.
• Tertiary DNS — (Optional) Configure the tertiary DNS.
• DNS search path — Configure the DNS search path.
4. To save your changes, select the OK.
5. To exit this screen, select Quit.
Maintenance
201