Users Guide

AFM
Deployment
Task
Error Status Recommended Action
2. Enable BMP on the switch.
• For S55 or S60, use the reload-type jump-
start config-download enable command.
• For all other switch types, enter CONFIG mode
and use the reload-type bmp config-scr-
download enable command.
Stack unit
cleanup
Stack unit renumbering
task: Failed
Verify Telnet/SSH/SNMP connectivity.
Upgrade
standby
Upgrade standby: Failed The standby MAC was not found or reported a card
problem. Verify that the standby switch is active.
Full
configuration
file transfer
Full config file transfer
to TFTP/FTP server:
Failed
Verify the TFTP/FTP connectivity and FTP credentials.
TFTP/FTP
connectivity
TFTP/FTP connection
issue between switch
and TFTP server
Verify TFTP/FTP connectivity from the switch to the TFTP
server.
Full
configuration
upload to switch
Full config upload:
Failed
Verify TFTP/FTP and Telnet/SSH connectivity and redeploy.
Verify that optional modules are installed according to the
fabric design. Verify that AFM is using the supported
software version.
Smart script
transfer failed
Smart script transfer:
Failed
Verify Telnet/SSH connectivity and redeploy.
Wiring validation Unable to validate
Wiring
Verify SNMP connectivity.
Wiring Errors Exist To resolve the errors, review error details on the Errors
screen.
Merge
configuration
changes
Apply configuration
changes: Failed
Verify Telnet/SSH connectivity and redeploy.
Custom
configuration
upload
Custom configuration
upload: Failed
Verify Telnet/SSH connectivity and redeploy.
Backup running
configuration
Backup config: Failed Verify Telnet/SSH connectivity and redeploy.
Deployment Software image
selected in pre-deploy
wizard is not available in
AFM image location.
Upload the software image as a superuser using the AFM
Virtual Appliance:
1. Log in to the AFM server as a superuser.
2. Select Upload Switch Software Image.
3. Enter the number for the switch model.
Troubleshooting
183