Users Guide

Switch Deployment Status Description Requires
Action
Recommended Actions
Deploy tab by selecting the
switch from the list.
7. From the Deploy Fabric
drop-down menu, select
Deploy and Validate.
8. On the Deploy tab, select the
switch and click Deploy
Selected.
PROTOCOL CONFIG
UPLOAD COMPLETED
Protocol Configuration
Upload Successful
No Information only
DEVICE DEPLOYMENT
SUCCESS
Switch Deployment
Successful
No Information only
UPLINK CONFIG
GENERATED
Uplink Configuration
Generated
No Information only
UPLINK CONFIG UPLOAD
IN PROGRESS
Uplink Configuration
Upload In-Progress
No Information only
UPLINK CONFIG UPLOAD
ERROR
Uplink Configuration
Upload Error
Yes
1. Verify the connectivity
between AFM and the switch.
2. Resolve any errors in the
Validation Status column.
3. Restart the deployment.
NOTE: Verify that the
switch is not in BMP
mode.
4. Navigate to the Network >
Fabric Name > Configure and
Deploy tab by selecting the
switch from the list.
5. From the Deploy Fabric
drop-down menu, select
Deploy and Validate.
6. On the Deploy tab, select the
switch and click Deploy
Selected.
UPLINK RECONFIGURED
REDEPLOY REQUIRED
Uplink re-configured,
Re-deployment of
Switch is required
Yes Restart switch deployment.
NOTE: Verify that the switch
is not in BMP mode.
1. Navigate to the Network >
Fabric Name > Configure and
Deploy tab by selecting the
switch from the list.
2. From the Deploy Fabric
drop-down menu, select
Deploy and Validate.
3. On the Deploy tab, select the
switch and click Deploy
Selected.
Troubleshooting
181