Users Guide

Table 63. Discovered Switch Error
Error Details Recommended Action
Disconnected
1. Verify connectivity from the AFM server to the switch.
2. Verify that the switch is running the minimum required software.
3. Validate the switch.
a. Navigate to the Network > Fabric Name > Configure and Deploy
tab.
b. From the Deploy Fabric drop-down menu, select Deploy and
Validate.
c. Click the Validation tab and select the switches.
d. Click Validate Selected.
Switch Name Mismatch
1. Verify that the IP address to switch name mapping is correct in the
pre-deployment configuration. If the pre-deployment configuration is
updated, redeploy the switch.
2. Validate the switch.
a. Navigate to the Network > Fabric Name > Configure and Deploy
tab.
b. From the Deploy Fabric drop-down menu, select Deploy and
Validate.
c. Click the Validation tab and select the switches.
d. Click Validate Selected.
Switch Model Mismatch
1. Verify that the IP address to switch name mapping is correct in the
pre-deployment configuration. If the pre-deployment configuration is
updated, redeploy the switch.
2. Validate the switch.
a. Navigate to the Network > Fabric Name > Configure and Deploy.
b. From the Deploy Fabric drop-down menu, select Deploy and
Validate.
c. Click the Validation tab and select the switches.
d. Click Validate Selected.
System MAC Address
Mismatch
1. Verify that the IP address to switch name mapping is correct in the
pre-deployment configuration. If the pre-deployment configuration is
updated, redeploy the switch.
2. Validate the switch.
a. Navigate to the Network > Fabric Name > Configure and Deploy
screen.
b. From the Deploy Fabric drop-down menu, select Deploy and
Validate.
c. Click the Validation tab and select the switches.
d. Click Validate Selected.
License Mismatch
1. Verify that the designed and provided license ports count are same.
2. Verify that you have a valid license file.
Troubleshooting
177