Users Guide

Error Details Recommended Action
3. Validate the switch.
a. Navigate to the Network > Fabric Name > Configure and Deploy
tab.
b. From the Deploy Fabric drop-down menu, select Deploy and
Validate.
c. Click the Validation tab and then select the switches.
d. Click Validate Selected.
Missing Link
1. Review the wiring plan.
2. Wire the switch according to the wiring plan to fix the missing link.
3. Validate the switch.
a. Navigate to the Network > Fabric Name > Configure and Deploy
tab.
b. From the Deploy Fabric drop-down menu, select Deploy and
Validate.
c. Click the Validation tab and then select the switches.
d. Click Validate Selected.
Partial Link
1. Verify that the switch is wired according to the wiring plan.
2. Verify the connectivity on AFM from both switches in the link.
3. Validate the switch.
a. Navigate to the Network > Fabric Name > Configure and Deploy
tab.
b. From the Deploy Fabric drop-down menu, select Deploy and
Validate.
c. Click the Validation tab and then select the switches.
d. Click Validate Selected.
Table 62. Undiscovered Switch Error
Error Details Recommended Action
Undiscovered Switch Error
1. Verify that the IP address for the switch is valid.
2. If necessary, correct the pre-deployment configuration.
3. From the AFM server, verify connectivity to the switch.
4. Verify that the switch is running the minimum required software.
5. Validate the switch.
a. Navigate to the Network > Fabric Name > Configure and Deploy
tab.
b. From the Deploy Fabric drop-down menu, select Deploy and
Validate.
c. Click the Validation tab and select the switches.
d. Click Validate Selected.
176
Troubleshooting