Users Guide

Troubleshooting

This section contains the following topics:

• Ping, Traceroute, Telnet, and SSH

• Validation Alarms

• Deployment and Validation Errors

• TFTP/FTP Error

• Switch Deployment Status

• Validating Connectivity to the ToR

Ping, Traceroute, Telnet, and SSH

To troubleshoot a switch in the fabric, use ping, traceroute, SSH, or Telnet.

NOTE: SSH or Telnet functionality depends on the switch protocol configuration.

1. From the menu, select Network > Fabric Name > Switch Name and then click the Troubleshoot tab.

2. To display the traceroute results, click the Ping, Traceroute, Telnet, or SSH or tab as appropriate.

3. Based on your selection, perform the following steps:

For ping:

• To display the ping results, click Ping

For traceroute:

• Click TraceRoute

For Telnet:

• In the Telnet Command field, enter the Telnet command.

• To display the Telnet results, click Send Command.

For SSH:

• In the SSH Command field, enter the SSH command.

• To display the SSH results, click Send Command

Validation Alarms

To troubleshoot alarms triggered during deployment, use the following table:

Troubleshooting

169