Users Guide

Number Status Status Details Response Action
3. To view error details, click the
Config Mismatch Errors tab.
4. Fix any errors.
9 Error Custom Configuration errors exist To check for switch custom
configuration errors:
1. From the menu, click Network
> Fabric Name and then click
the Configure and Deploy tab.
2. Click Errors.
3. To view error details, click the
Custom Config Errors tab.
4. Fix any errors.
10 Error Wiring Errors Exist To verify the Errors in the Wiring
Error tab:
1. From the menu, click Network
> Fabric Name and then click
the Configure and Deploy tab.
2. Click Errors.
3. To view error details, click the
Wiring Errors tab.
4. To sort the errors by tier
(aggregation, access or all),
use the Tierdrop-down menu.
To sort the errors by type
(missing link, wiring mismatch,
or all), use the Show drop-
down menu.
5. Fix any errors.
11 Error Validation failed because switch
license mismatch (Z9500–series
switches only)
A Z9500–series switch has fewer
licensed ports than the switch in
the fabric design. To view details
from AFM:
1. From the menu, click Network
> Fabric Name and then click
the Configure and Deploy tab.
2. Click Errors.
3. To view error details, click the
Discovered Errors tab.
4. Fix any errors.
12 InProgress Node validation in progress... None
13 InProgress Configuration Validation in progress... None
14 InProgress Wiring Validation in progress... None
150
Configuring and Deploying the Fabric