Users Guide

a. If you connect to fibre channel storage-facing ports, AFM automatically populates the SAN Fabric
ID when you select the VLAN ID.
b. If you connect to iSCSI storage-facing ports, select a VLAN ID and associate it with a vendor.
Navigate to the Vendor drop-down menu and select one of the following options:
• Compellent
• EqualLogic
• Other
Figure 61. Selecting a Vendor
NOTE: Associate only one vendor for each VLAN. If you associate a VLAN to multiple
storage-facing ports, AFM automatically sets the vendor as the same across for all
associated entries.
6. Click Next to go to the VLAN Mapping screen.
L2 VLT/L3 Routed VLT Pre-Deployment — VLAN Mapping
To add VLANs and associate ports on the different switches for a Layer 2 fabric, use the Downlink Port
Configuration screen. After you add a VLAN and associate it, you can copy switch VLAN or port VLAN
configurations. You can associate one or more tagged VLANs with a port. You can only associate one
VLAN per port.
1. From the menu, click Network > Fabric Name and then the Configure and Deploy tab.
2. From the Deploy Fabric drop-down menu, select Pre-deployment Configuration.
3. Navigate to the VLAN Mapping screen.
Configuring and Deploying the Fabric
121