Users Guide

NOTE: To download the latest Dell Networking operating system software version for the switch,
refer to Upload Switch Software in the AFM Installation Guide.
1. From the menu, click Network > Fabric Name and then click the Configure and Deploy tab.
2. From the Deploy Fabric drop-down menu, select the Pre-deployment Configuration option.
3. Navigate to the Software Images screen.
Figure 52. IOA Pre-deployment Software Images Screen
4. Select the TFTP or FTP site option that contains the software image.
5. Enter the path of the software image on the TFTP or FTP site.
6. Click Next to go to the Summary screen.
Pre-Deployment (IOA) – Summary
To review the IOA pre-deployment configuration, use the Summary screen. This screen displays the
specified IP and protocol settings for the fabric, uplink, and downlink configuration. It also displays the
software image information for each type of switch and the configuration file transfer status to the
remote or local TFTP or FTP server.
1. From the menu, click Network > Fabric Name and then click the Configure and Deploy tab.
2. From the Deploy Fabric drop-down menu, select the Pre-deployment Configuration option.
3. Navigate to the Summary screen.
4. Review the IOA pre-deployment summary information. To export configure VLAN information, click
Export.
Figure 53. IOA Pre-deployment Summary Information
Configuring and Deploying the Fabric
111