Users Guide

VLAN Option Description
Copy Chassis
Configuration
Copy the chassis configuration from the current chassis to another
chassis in the fabric.
NOTE: The VLAN configuration is copied symmetrically to the new
chassis. For example, the port assigned as Port 1 on the source
chassis is also assigned as Port 1 on the destination chassis.
Copy Switch Config Copy the IOA VLAN configuration to any IOAs inserted in the same or
different M1000e chassis. Copy the VLAN configuration from and to
multiple chassis or switches.
Copy VLAN Tagged
Ports
Copy the VLAN tagged port configuration from a selected port to other
ports within a switch.
Edit Edit the VLAN configuration.
Delete Remove the VLAN configuration.
6. Click Next to go to the SNMP and CLI Credentials screen.
Isolated Networks
The isolated networks security feature can be enabled on a VLAN or a range of VLANs. Only standalone
mode is supported, as there is only a single LAG uplink.
When you enable this feature:
• Server-to-server communication is disabled on VLANs where the isolated networks feature is enabled.
• Servers on those VLANs can only communicate through the uplink LAG (core).
108
Configuring and Deploying the Fabric