Users Guide

Figure 45. Device MAC Association — DHCP Integration
1. Click Save File and specify the location for the generated DHCP configuration file or copy and paste
the configuration into the DHCP server.
2. Verify the TFTP or FTP file transfer for the DHCP configuration file is successful and verify the CLI and
SNMP information on the Summary screen, then click Finish.
After completing the Device MAC Association wizard:
1. Enable BMP on all devices.
2. Go to the Network > FabricName > Configure and Deploy tab. From the drop-down Deploy Fabric
menu, select Device MAC Association Status and verify that the Device MAC Association completes
successfully.
Viewing Device MAC Association Status
The Device MAC Association Status screen displays detailed information for the IP address list that the
Device MAC Association wizard generates, including the following:
• IP address
• Associated Name
• Vendor
• Model
• MAC Address
• Serial Number
• Status Description
• Reason
Configuring and Deploying the Fabric
103