Users Guide

Figure 42. Device MAC Association — IP Configuration
4. Enter the default gateway in the Default Gateway field.
5. Enter the management route in the Management Route field. Enter the netmask in the / field.
6. Enter the switch’s IP address in the Enter Switch IP Address field and click the + button. Repeat for
any additional switches.
NOTE: You can add an individual IP address or IP address with a subnet or a range (for example:
10.16.133.1-150).
• To search for a previously entered IP address, enter a portion of or the entire IP address in the
Search IP address list: field. The software displays all IP addresses that match the search term in
the List of added IPs field. If you do not enter a search term, all known IP addresses appear.
• To remove an IP address from the displayed list, select the IP address and click the — button.
• To view a list of all IP addresses selected for device MAC association, click Preview IP. The
Preview IP dialog box displays only the devices participating in the discovery. To view additional
pages, use the arrow buttons or enter the page number in the page number entry field to the left
of the arrow buttons.
100
Configuring and Deploying the Fabric