Deployment Guide

• Syslog IP Address — Verify that the new IP address has been applied to the first system log entry.
The AFM IP address uses the first system log entry by default, so the first system log entry is
typically the AFM server.
11. Click the refresh icon on the top right of the Settings screen and verify that the new AFM IP address
has been applied.
12. On the AFM Virtual Appliance console, login as superuser and select Restart AFM Application.
When AFM starts, the AFM server uses the new IP address.
13. Redeploy all the fabrics with the new IP address to register the trap host and system log IP address.
14. To save your changes, select OK.
15. To exit this screen, select Quit.
Changing the AFM Superuser Password
1. Select Change AFM Superuser Password.
2. Press Enter.
The Change AFM Superuser Password Screen screen displays.
Figure 4. Change AFM Superuser Password Screen
3. In the Enter current superuser password field, enter the superuser account password. The default
password is Superuser1.
NOTE: The password must be 8–32 characters and include at least three characters from the
following categories:
• lowercase alphabetic character
• uppercase alphabetic character
• numeric character (0-9)
• special character
4. Press Enter.
5. In the Confirm New Superuser Password field, enter the new superuser password again to confirm
the superuser password.
6. Press Enter to return to the main menu.
14
Step 3: Manage the AFM Virtual Appliance