Owner manual

Example

This lists the RAID IDs, separated by spaces:

> raids –s

md0 md1 md2 md3

raid:update

Updates a RAID device.

Syntax

raid:update [options] id

Options

--boot or –b Include only boot devices.

--rescan

or –r Force rescan of boot devices.

--fault

or –fail or -f <deviceName(s)>

Mark a device as failed/faulted.

--add or -a <device name(s)>

Add one or more devices to the RAID array.

--remove

or -r <device name(s)>

Remove one or more devices from the RAID array.

–-node or -n <address(es)>

Issue this command to one or more nodes in the cluster.

--cluster Issue this command to all nodes in the cluster.

(See

help –-all for details on all other options.)

Arguments

id ID or UUID of the LUN to update

Example

This marks the ioDrive

fioa as faulted, in testRAID:

> raid:update --fault fioa testRAID