Owner manual

Arguments

command Name of the command to get help for

Using Auto-Completion

Pressing Tab after beginning to type a CLI command displays the possibilities for completing the

command, listed alphabetically. Commands (partial or complete) and options can be auto-

completed. Below are a few examples.

Type this … See this …

(Partial command)

u<tab> unset upload url

(Full command) raid<tab> raid:create raid:delete raid:get

raid:list raid:raids raid:update raids

(Partial option) raid:create --<tab> --chunksize --help --raidtype

lun:create target<tab>

21:00:00:24:ff:60:03:10

21:00:00:24:ff:60:03:11

21:00:00:24:ff:60:03:12

21:00:00:24:ff:60:03:13

history

Displays recent commands that have been run. To scroll through recent commands, use the Up

and Down arrows.

Syntax

history [options]

Or …

<command> --history [options]

Options

–-window or -w Show the history in a window, if possible.

Notes

The

history command also enables you to select and repeat a previous command by its prefix,

by using “!” and the prefix as the command. For example:

> drives

fioa

> !dr

fioa