Manual

Alert Description
Boot RAID has no spares and is
vulnerable if a subsequent failure
occurs.
Refer to the Knowledgebase, User Guides, or Customer
Support to correct the problem.
ALERT PARAMETER ATTRIBUTES
These attributes are available in the Choose Attributes drop-down lists of the Add Rule dialog, in
the Settings tab.
Category Alert Attribute
Adapter Adapter Board Kind, Adapter PCI Slot Power, Adapter PCIe
Bandwidth, Adapter PCIe Link Speed, Adapter PCIe Link Width,
Adapter S/N, External Power, Min Volts, PCIe Power Limit, Peak
Amps, Peak Volts, Peak Watts, Power Amps, Power Monitoring,
Power Volts, Power Watts
Cluster Cluster IP Address, Cluster Name
Driver Firmware Current Firmware Revision, Current Firmware Version, Driver Version,
Minimum Firmware Revision
Formatting & Volume Format UUID, Formatted Size, Sector Count, Sector Size
Hardware Alt Part Number, Board Kind, Device Label, Device Name, Device S/N,
ECC Bytes per Codeword, ECC Num Bits Correctable, Factory Capacity,
Location within Adapter, Part Number, Port within Adapter, Product
Name, Product SKU, Product Serial Number, ioMemory S/N
Host Agent Version, Host IP, Host OS, Host Offline Since, Host Online,
Hostname, OS Native Trim Active, Trim Enabled, Trim Service Active
PCI PCI Device ID, PCI Slot Number, PCI Slot Power, PCI Subsys Device ID,
PCI Subsys Vendor ID, PCIe Bandwidth, PCIe Link Speed, PCIe Link
Width
Performance/Status Active Media, Alias, Current Operation, Current Operation Phase,
Current Operation Progress, Current RAM Used, FPGA Temperature,
Host Online, Peak RAM Used, Reserve Space, Session Read Ops,
Session Write Ops, State, Total Physical Read, Total Physical Written,
ioMemory
Settings Beacon Status, Swap Support
86