User Manual
Table Of Contents
- Dell Precision 5820 Tower Owner's Manual
- Working on your computer
- Removing and installing components
- Screw size list
- Recommended tools
- Side cover
- Power supply unit (PSU)
- Front bezel
- Hard Disk Drive bezel
- Hard disk drive assembly
- Slim Optical Disk Drive
- Front input and output bezel
- Optical Disk Drive
- 5.25 inch ODD bracket
- Front input and output panel
- Input and output panel bracket
- Intruder switch
- Internal chassis speaker
- Air shroud
- Memory
- Expansion card
- Coin cell battery
- System fan
- Fan bracket
- PCIe holder
- Heat sink and CPU fan assembly
- Processor
- Front system fan
- System board
- Technology and components
- System specifications
- System Setup
- Software
- Troubleshooting
- Contacting Dell
5 Lift the cover to remove it from the system.
Installing the side cover
1 First hold and align the bottom of the side cover to the chassis.
2 Ensure that the hook on the bottom of the side cover snaps into the notch on the system.
3 Press the system cover until it clicks into place.
CAUTION
: The system will not power on without the side cover. Also, the system will shut down if the side cover is
removed while the system is on.
4 Follow the procedure in After working inside your computer .
12
Removing and installing components