Manualshelf

Users Guide

ManualsBrandsDell ManualsAudio966 All in One Inkjet Printer
51525354555657585960
You can view or change the settings in the TCP/IP Menu by selecting TCP/IP from the Network Setup menu.
Maintenance Mode
To access Maintenance mode options:
1. From the main menu, press the up or down Arrow button
to scroll to Maintenance.
2. Press the Select button .
Menu
item
Settings
* Factory default setting
Enable
DHCP
Yes*
No
NOTE: You cannot change or set an IP Address, IP Netmask, and IP Gateway if DHCP is enabled.
Set IP
Address
Press the Select button
to enter the Set IP Address menu.
From the Set IP Address menu, use the keypad to enter an IP address. Press the right Arrow button
to
enter a set of numbers in the next field, or press the left Arrow button to erase an entry. Press the Back
button to save the settings.
NOTE: The IP address cannot be changed if DHCP is enabled.
Set IP
Netmask
Press the Select button
to enter the Set IP Netmask menu.
From the Set IP Netmask menu, use the keypad to enter an IP address. Press the right Arrow button
to
enter a set of numbers in the next field, or press the left Arrow button to erase an entry. Press the Back
button to save the settings.
NOTE: The IP address cannot be changed if DHCP is enabled.
Set IP
Gateway
Press the Select button
to enter the Set IP Gateway menu.
From the Set IP Gateway menu, use the keypad to enter an IP address. Press the right Arrow button
to
enter a set of numbers in the next field, or press the left Arrow button to erase an entry. Press the Back
button to save the settings.
NOTE: The IP address cannot be changed if DHCP is enabled.
Maintenance Mode Menu
Menu item Action
View Ink Levels Press the Select button to display the current ink level for each cartridge on the screen.
Clean Cartridges Press the Select button
to clean the ink cartridges.
Align Cartridges Press the Select button
to align the ink cartridges.
Change Print Cartridges Press the Select button
to view steps detailing how to change ink cartridges.
Print Test Page Press the Select button
to print a test page.
Call Diagnostics
Off*
Audio on
Print T30 Signals Report
Both Audio and Report