Users Guide

Fax Mode Capabilities
When you scan to fax, your document will scan in at 200 dpi (dots per inch). You can fax black and white documents.
For faxing to work properly, the printer must be able to access a computer connected to an active analog telephone line.
Print and Scan Mode Capabilities
Your printer can scan from 72 to 19,200 dpi. Although your printer has this capability, Dellâ„¢ recommends using the
preset resolutions.
Operating System Support
The printer supports:
Windows XP Professional x64
Windows XP
Windows 2000
Windows Vista
Memory Specifications and Requirements
Your operating system must meet the minimum system requirements.
Operational mode <32 W
NOTE: If you are faxing over a telephone line connected to a DSL modem, install a DSL filter to avoid interference
with the analog fax modem signal.
NOTE: ISDN (integrated service digital network) and cable modems are not fax modems and are not supported for
faxing.
Print and scan resolution Scan resolution Print resolution
Photo/Glossy paper All other media
Draft 150 x 150 dpi 600 x 600 dpi 300 x 600 dpi
Normal 300 x 300 dpi 1200 x 1200 dpi 600 x 600 dpi
Photo 600 x 600 dpi 4800 x 1200 dpi 1200 x 1200 dpi
Operating
System
Processor speed (MHz) RAM
(MB)
Hard disk
Windows XP
Professional x64
AMD Athlon 64, AMD Opteron, Intel Xeon with Intel EM64T support, or
Intel Pentium 4 with Intel EM64T support
256 1.5 GB
Windows XP Pentium II 300 128 500 MB
Windows 2000 Pentium II 233 128 500 MB
Windows Vista 800 MHz 512 20 GB (15 GB
free space)