Projector User's Guide

Using Your Projector 35
DISPLAY (in PC Mode)
Using the Display menu, you can adjust the display settings of your projector. The
Display menu provides the following options:
V
IDEO MODE—Allows you to optimize the projector’s display mode:
Presentation, Bright, Movie, sRGB (provides a more accurate color
representation), and Custom (set your preferred settings for these two options). If
you adjust the settings for White Intensity or Degamma, the projector
automatically switches to Custom.
S
IGNAL TYPE—Allows you to manually select the signal type: RGB, YCbCr, or YPbPr.
Z
OOM—Press to digitally magnify an image up to 8 times on the projection
screen and press to reduce the zoomed image (for single display).
Z
OOM NAVIGATION—Press to navigate the projection screen.
W
HITE INTENSITY—Set 0 to maximize the color reproduction and 10 to maximize
the brightness.
D
EGAMMA—Allows you to adjust among the 4 preset values (1, 2, 3, 4) to change
the color performance of the display.
H
ORIZONTAL POSITION—Press to move the image to the left and to move the
image to the right.